Pioneer MJ-L11 - Manuels

7 En/Fr Before you start Avant de commencer 1 English Fran çais Hints on installation We want you to enjoy using this recorder for years to come, soplease bear in mind the following points when choosing asuitable location for it: Do... • Use in a well-ventilated room. • Place on a solid, flat, level...

10 En/Fr Before you start Avant de commencer 1 Storing and labelling MDs When you’re not playing a minidisc, put the disc cartridgeback in the case for storage. Avoid storing or leaving discs invery hot or humid areas, such as in a car in summer. Alsoavoid leaving discs in direct sunlight, or in pla...

11 En/Fr Before you start Avant de commencer 1 English Fran çais Analog and digital recording Whatever you record onto an MD is stored on the disc asdigital data (in other words, numbers). This is what we meanwhen we say that MD is a digital format. However, what youfeed into this unit to record can...

12 En/Fr Before you start Avant de commencer 1 About the Table of Contents(TOC) When you load any kind of minidisc into the recorder, the firstthing it does is read a section of the disc called the Table ofContents, or TOC. Just as the contents page of a book tells thereader what each chapter is abo...

14 Fr 1 Avant de commencer Symptôme L’enregistreur affiche le message MD TOCFULL (TOC du MD complète) bien que ledisque contienne moins de 255 plages(quantité maximale). L’enregistreur affiche le messageDISC FULL (disque complet) avant quevous ayez atteint la duréed’enregistrement maximale du disque...

15 En/Fr Connecting Up Raccordements 2 English Français Note The following illustrations are for the CD tuner rear panelonly. However, connections for the DVD/CD tuner are thesame. 1 Connect the MD recorder system cable to thethe CD tuner or DVD/CD tuner On the CD tuner and DVD/CD tuner, the socket ...

16 En/Fr Connecting Up Raccordements 2 Connecting the power 1 Plug one end of the supplied power cord intothe AC INLET. 2 Plug the other end into a household poweroutlet. To insert, hold the connector and push firmly into the socketuntil you hear it click home. To remove, hold the connector securely...

17 En/Fr Controls and displays Commandes et fenêtre d’affichage 3 English Fran çais Display (XC-L11 or XV-DV77/DV88) Front panel PLAY/PAUSE REC 6 EJECT STOP 0 7 6 PLAY/PAUSE (touch sensor) (capteur à effleurement) ¶ REC Disc slot 0 EJECT (touch sensor)(capteur à effleurement) 7 STOP DIGITAL REC MD A...

Getting Started 4 Préparation 18 En/Fr Playing an MD You should now have your MD recorderconnected up to the rest of the system, andplugged into the power outlet. This chaptertakes you through the basics of using theMD recorder—playing discs and making arecording from the CD (or DVD/CD) tuner. When ...

19 En/Fr Getting started Préparation 4 English Français If you are using the XV-DV77/DV88 remote control, you canuse the number buttons to select tracks directly: For track numbers 1 to 10, use the corresponding numberbutton. For track numbers over 10, press the >10 button, then enter the track n...

20 En/Fr Getting started Préparation 4 Changing the display You can choose to display various kinds of information duringplayback, recording and while the MD is stopped. Switchbetween them by pressing SYSTEM DISP ( DISP ) . When an MD is stopped If the display shows the disc name/totalplaying time: ...

22 En/Fr Getting started Préparation 4 Introduction to recording MDs If you've already read the About minidiscs section (pages 8- 14), you'll already have a good idea of what MD is capable of. Recording levels Whether you're recording from an analog or digital source,normally there's no need to set ...

4 Getting Started Préparation 23 En/Fr English Fran çais Automatically recordingfrom a CD This feature makes recording a CD assimple as possible by automaticallystarting and stopping the CD and MDtogether. There are two modes: all-tracksynchro records the whole disc; 1 tracksynchro records just a si...

24 En/Fr Getting started Préparation 4 4 If you want to record just one CD track, selectit using the 4 and ¢ buttons (XC-L11 CD tuner only). 5 Press ¶ (front panel only). The recorder goes into record-pause mode, waiting for you tostart the CD. The SYNCHRO and indicators flash and the red REC indica...

4 Getting Started Préparation 25 En/Fr English Fran çais Automatically recordingfrom the optional tapedeck (CT-L11) This feature makes recording a tape assimple as possible by automaticallystarting and stopping the tape and MDtogether. You can choose to record thewhole tape or alternatively, to star...

28 En/Fr Getting started Préparation 4 The MD menu functions Playback features accessed via the MD menuare: PROGRAM - Specify the track order of a disc (page 34) RANDOM PLAY - The recorder plays the tracks in a random order (page 37) REPEAT MODE - Set the current track or disc to repeat play (page 3...

29 En/Fr More playback features Autres fonctions de lecture 5 English Français Using Groups With so much recordable space possible on an MD, manuallyskipping from track-to-track can become a bit of a chore. Forthis reason, you can divide your MD into several groups ofsongs for easy and quick access....

More playback features 5 Autres fonctions de lecture 30 En/Fr Making a group 1 Press SYSTEM MENU (MENU)and select MD MENU. Remember Use the 2 and 3 ( 4 and ¢ ) buttons to change the currently displayedoption in the menu. Press ENTER ( SET ) to select. Press 7 anytime to cancel and exit the menu. 2 S...

31 En/Fr More playback features Autres fonctions de lecture 5 English Fran çais Selecting a group 1 Make sure the MD component is selected. 2 Use – FOLDER/GROUP + (GROUP –/+) tochoose the group you want. The starting and ending tracks in the group are shown brieflyand then the group name scrolls acr...

32 En/Fr More playback features Autres fonctions de lecture 5 Editing a group Note Songs can’t belong to more than one group. If you try to assigna track to two groups, the later group will take the song. 1 Select the group on the disc you want to edit. If the disc is stopped, the group must still b...

33 En/Fr More playback features Autres fonctions de lecture 5 English Fran çais Canceling groups This feature will simply “ungroup” the songs in the groupthat you have selected. It will not delete the songs from thedisc. 1 While the disc is stopped, select the group(s)on the disc you want to cancel....

34 En/Fr More playback features Autres fonctions de lecture 5 Programming the track order You can program a sequence (a playlist) of up to 24 tracks toplay. Tracks can appear more than once in the playlist, or canbe left out entirely. Once you eject the disc, (or switch thepower off), the playlist i...

35 En/Fr More playback features Autres fonctions de lecture 5 English Français DVD tuner remote control: 1 Press PROGRAM (SHIFT & 8). 2 Using the number buttons, enter the tracknumbers in the order you want them played. Using the number buttons For track numbers 1 to 10, use the corresponding nu...

36 En/Fr More playback features Autres fonctions de lecture 5 DVD tuner remote control: • To repeat the current track, press REPEAT(SHIFT & 4) once. The RPT - 1 indicator lights up in the display and the current track repeats until you press REPEAT twice. Either way, repeat is canceled. You can ...

37 En/Fr More playback features Autres fonctions de lecture 5 English Fran çais • To repeat the whole disc, press REPEAT(SHIFT & 4) twice. The RPT indicator lights up in the display and the MD repeats until you press REPEAT again (in which case the disc continues playing to the end, then stops)....

38 En/Fr More recording features Autres fonctions d’enregistrement 6 Recording options Although this unit can make recording largely automatic, youcan also manually control a number of settings if you prefer.For any kind of recording, including the synchro-recordingmode covered on page 23, you can: ...

39 En/Fr More recording features Autres fonctions d’enregistrement 6 English Français 1 With the MD stopped, press SYSTEM MENU(MENU) and select MD MENU. Make sure you have selected the source you wish to record(DVD/CD (CD), VIDEO 1, 2, 3 (AUX) or the optional tapedeck). Remember Use the 2 and 3 ( 4 ...

41 En/Fr More recording features Autres fonctions d’enregistrement 6 English Fran çais Adjusting the digital volume With pre-recorded CDs, there’s normally no need to set therecording level, but it’s possible to use the DIGITAL VOLUME menu option to change the level if necessary. 1 Press DVD/CD (CD)...

42 En/Fr More recording features Autres fonctions d’enregistrement 6 Manually recording from a source On page 23 we covered synchro-recording from a CD. Here'show to record any source, including components connectedvia the AUX inputs on the CD tuner (the VIDEO inputs on the XV-DV77/DV88 DVD/CD tuner...

44 En/Fr More recording features Autres fonctions d’enregistrement 6 Recording over unwanted material One of the convenient features of recording on MD is that itwill automatically record on the next available section of thedisc. Sometimes though, you'll want to record over somethingthat's already o...

45 En/Fr More recording features Autres fonctions d’enregistrement 6 English Fran çais Setting up a future recording You can set the timer to record something from either thetuner or a component connected to the auxiliary inputs. Forexample, you might want to record a program on the radiothat is bro...

48 En/Fr Editing Edition 7 About MD editing The MD system allows for very flexible editing of discs. Usingthe editing features described on the following pages you caneasily: create names for discs, individual tracks, or groups oftracks; combine two tracks into one long one, or divide a trackinto tw...

49 En/Fr Editing Edition 7 English Français Naming a disc You can name a recordable MD so that when you load the discinto the recorder, the disc's name appears in the display. Thename can be up to 100 characters long, including spaces. Youcan change disc names on recordable MDs (if you've recordedso...

50 En/Fr Editing Edition 7 DVD tuner remote control: Use numbers keys 1-9 for the corresponding number andthe letters shown above each key below. Press a keyrepeatedly to cycle through the letters and numbers on thatkey. GHI JKL PQRS TUV WXYZ MNO ABC DEF 1 2 3 4 5 6 7 8 9 10/0 Use the CHARACTER DISP...

51 En/Fr Editing Edition 7 English Fran çais Naming a track In addition to naming the disc, you can name each track on adisc too. Again, the names can be up to 100 characters long. 1 Select the track on the disc you want to name. You can name tracks in any mode, but if the disc is stopped,the track ...

52 En/Fr Editing Edition 7 Naming a group of tracks If you have alot of tracks on an MD, they can be sorted intogroups for easy access. In total, group names can be up toabout 200 characters, but it really depends on the length ofyour disc name—the longer the disc name, the less space youwill have t...

53 En/Fr Editing Edition 7 English Fran çais Dividing a track into two If you recorded two pieces of music that run into each otherwithout a break through the analog inputs, the recorderwouldn't have automatically given them their own tracknumbers. After the recording is complete, you might want toa...

54 En/Fr Editing Edition 7 Combining two tracks into one If there are two consecutive tracks on a disc that you'd ratherwere a single track, you can ‘glue’ them together using theCombine function. All the tracks following the newlycombined tracks are automatically renumbered. There are a few limitat...

55 En/Fr Editing Edition 7 English Fran çais Moving tracks on a disc Although you can use the program playback feature totemporarily play a disc out of the 'regular' track order, youcan also change the track order permanently (unless, ofcourse, you edit the track order again) by moving tracks to adi...

57 En/Fr Editing Edition 7 English Fran çais Erasing tracks on a disc Erasing unwanted tracks on a disc frees up disc space forfurther recording. When you erase a track, all the tracksfollowing it are automatically renumbered. Erasing the wholedisc erases not only all the tracks on the disc, but als...

58 En/Fr Editing Edition 7 Erasing individual tracks 1 Press MD while playing the track you want toerase to pause the disc. Alternatively, press 6 on the front panel. 2 Press SYSTEM MENU (MENU) and select MDMENU. Remember Use the 2 and 3 ( 4 and ¢ ) buttons to change the currently displayed option i...

59 En/Fr Editing Edition 7 English Français Undoing a mistake Although this unit always lets you abort an edit beforecompleting it, there will probably still be times when youcomplete an edit operation only to find that it wasn't what youhad intended. As long as you haven't switched the power off,up...

63 Fr Informations complémentaires 8 English Fran çais Message NO DISC DISC ER* ?DISC DISC FULL BLANK DISC Playback MD PROTECTED TOC FULL Can’t REC TEMP OVER Can’t EDIT NAME FULL DEFECT MECH E* Description Le MD n’est pas dans l’appareil. Les données du MD ne peuvent pas être lues. Le disque est end...

64 Fr Informations complémentaires 8 Message Can’t COPY NOT AUDIO UTOC ER W UTOC ER* DIN UNLOCK TOC ERR* SIO ERROR Description Vous avez tenté d’enregistrer des données protégées contre lacopie. Le disque contient des données qui ne sont pas audio. Les données de la UTOC ne peuvent pas être enregist...

65 Fr Informations complémentaires 8 English Fran çais Dépannage Les effets d’une utilisation incorrecte peuvent être confondus avec une anomalie ou un dysfonctionnement. Si vous pensez quel’appareil présente une défaillance, commencez par vérifier les éléments suivants. La défaillance peut parfois ...

66 En/Fr Additional information Informations complémentaires 8 Specifications Recording method ........................... Magnetic field modulation overwriting type Playback method ................................. Non-contact optical type Sampling frequency ........................... 44.1 kHz, 32...