Whirlpool WOS11EM4EW - Notice

5

Audible Tones Disable

Turns off all tones, including the end of cycle tone and key press
tones.

1.

Press SETTINGS until “SOUND” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

Sound Volume

Sets the pitch of the tone to either high or low.

1.

Press SETTINGS until “SOUND VOLUME” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

End of Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1.

Press SETTINGS until “END TONE” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

Key Press Tones

Activates or turns off the tones when a keypad is pressed.

1.

Press SETTINGS until “KEYPRESS TONE” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.

1.

Press SETTINGS until “REMINDER TONE” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

12/24 Hour Clock

1.

Press SETTINGS until “12/24 HOUR” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

Demo Mode

IMPORTANT:

This feature is intended for use on the sales floor

with 120V power connection and permits the control features to be
demonstrated without heating elements turning on. If this feature is
activated, the oven will not work.

1.

Press SETTINGS until “DEMO MODE” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

12-Hour Shutoff

The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.

1.

Press SETTINGS until “12 HR AUTO OFF” is displayed.

2.

The current setting will be displayed.

3.

Press the “1” keypad to adjust the setting.

4.

Press CANCEL to exit and display the time of day.

Languages - Scrolling Display Text

Language options are English, Spanish and French.

1.

Press SETTINGS until “LANGUAGE” is displayed.

2.

The current setting will be displayed.

3.

Press the number keypad as instructed by the scrolling
text to select the new language.

4.

Press CANCEL to exit and display the time of day.

Oven Temperature Offset Control

IMPORTANT:

Do not use a thermometer to measure oven

temperature. Elements will cycle on and off as needed to provide
consistent temperature, but they may run slightly hot or cool at
any point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.

The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1.

Press SETTINGS until “TEMP CALIB” is displayed.

2.

The current setting will be displayed.

3.

Press START to select the choice displayed in Step 2. Wait
several seconds for the display to change or press START, and
then continue with Step 4.

4.

Press the “3” keypad to increase the temperature in 5°F (3°C)
increments, or press the “6” keypad to decrease the
temperature in 5°F (3°C) increments. The range is from -30°F to
+30°F (-18°C to +18°C).

5.

Press START.

6.

Press CANCEL to exit and display the time of day.