Tripp Lite Isobar Ultra - Notice

1

Copyright © 1999 Tripp Lite. All rights reserved. Isobar

®

and Isotel

®

are registered trademarks of Tripp Lite.

1111 W. 35th Street

Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

Owner's Manual

Isobar

®

, Isobar

®

Ultra,

Isotel

®

& Isotel

®

Ultra

Premium Surge Suppressors (120V)

ESPAÑOL : p. 5

FRANÇAIS : p. 9

Storage & Service:

p. 5

Specifications:

p. 6

Warranty & Insurance: p. 6

• Install your surge suppressor indoors, away from excess moisture, heat and dust.

• Connect your surge suppressor to a three-wire, grounded AC power outlet. Do not

remove or modify the ground pin of the surge suppressor's plug. Do not use two-

prong adapters with the surge suppressor's plug.

• Your surge suppressor does not require maintenance. Do not open your surge

suppressor for any reason. There are no user-serviceable parts inside.

Safety

Quick Installation

Basic Operation:

p. 4 - 5

Safety:

p. 2

Plug surge suppressor into a three-
wire, grounded 120V electrical outlet.

The surge suppressor cannot provide full protection unless it is
plugged into a properly wired and grounded outlet.

Flip surge suppressor’s ON – OFF
switch ON (switch will light up.)

When this switch is lit, it indicates that AC power is enabled at the
surge suppressor's outlets.

Plug the power cords of your
electrical equipment into your surge
suppressor's outlets.

Your electrical equipment is now protected from AC surges on the
power line. Note for models with more than 2 outlets: the outlets
are arranged into pairs called isolated filter banks. For best
results, plug heavy power draw devices such as printers into the
banks closest to the surge suppressor's power cord and sensitive
equipment such as computers into the banks furthest from the
surge suppressor's power cord. This gives sensitive equipment the
greatest protection from AC surges and isolates it from line noise
from heavy power draw devices.

2

1

3