McIntosh MC275 - Mode d'emploi

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer’s instruc-

tions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other appa-

ratus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polar-

ized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the pro-

vided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete

outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer,

or sold with the apparatus. When a

cart is used, use caution when mov-

ing the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service person

-

nel. Servicing is required when the apparatus

has been damaged in any way, such as pow-

er-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

15. Do not expose this apparatus to dripping or

splashing and that no objects filled with liq

-

uids, such as vases, should not be placed on the

equipment.

Ne pas exposer cet appareil à des éclaboussures

ou gouttelettes d’un liquide. Aucun objet rem-

plie de liquide comme par exemple un vase ne

doit être placé sur l’appareil.

16. If this equipment is supplied with a power

supply cord only, the mains plug of the power

supply cord shall remain readily operable. To

completely disconnect this apparatus from the

a.c. mains disconnect the plug from the a.c.

receptacle.

Si l’équipement est uniquement alimenté par

un cordon d’alimentation, la fiche du cordon

d’alimentation doit demeurer aisément acces-

sible. Pour déconnecter complètement l’équi-

pement du réseau d’alimentation, déconnecter

la fiche du cordon d’alimentation de la prise

murale.

17. If this equipment is supplied with AC /DC

Adapter with separate power supply cord or the

AC/DC Adapter plugging directly into an a.c.

receptacle, they shall remain readily operable.

To completely disconnect this equipment from

the a.c. mains remove the AC /DC Adapter

mains power supply cord from the a.c. recep-

tacle or remove the AC /DC Adapter when it is

directly plugged into the a.c. receptacle.

Si l’équipement est alimenté par un adaptateur

AC/DC munis d’un cordon d’alimentation ou

un adaptateur AC/DC qui est alimenté directe-

ment à la prise murale, ils doivent demeurer

aisément accessibles. Pour déconnecter com-

plètement l’équipement du réseau d’alimen-

tation, déconnecter l’adaptateur AC/DC de la

prise murale ou déconnecter le cordon d’ali-

mentation de l’adaptateur AC/DC de la prise

murale.

18. WARNING: Do not expose batteries or battery

pack to excessive heat such as sunshine, fire or

the like.

AVERTISSEMENT: Les batteries ou bloc de

batteries ne doivent pas etre exposees a une

chaleur excessive telle que celle du soleil, feu

ou autre source de chaleur similaire.

19. CAUTION: danger of explosion if battery is in-

correctly replaced. Replace only with the same

or equivalent type.

ATTENTION: danger d’explosion si la pile

n’est pas remplacée correctement. Ne remplac-

er que par le même type ou un type équivalent.

20. Connect mains power supply cord only to a

mains socket outlet with a protective earthing

connection.

21.

Warning: The Ethernet connector of this

equipment must not be directly connected to

a public network. Connection is to be made

only by way of a modem or router approved

for this purpose.

T

he lightning flash with arrowhead, within an equilateral trian

-

gle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be

of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intend

-

ed to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompa

-

nying the appliance.

ATTENTION:

RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

WARNING: TO REDUCE RISK OF

FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS INSIDE. RE-

FER SERVICING TO QUALIFIED PERSONNEL.

TO PREVENT THE RISK OF ELEC-

TRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SER-

VICEABLE PARTS INSIDE.

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

a) User Information acc. to FCC15.21 as following:

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

b) Statement for Class B digital device acc. to FCC

15.105 as following:

NOTE: This equipment has been tested and found

to comply with the limits for a Class A/B

digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harm-

ful interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interfer-

ence to radio communications. However,

there is no guarantee that interference will

not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can

be determined by turning the equipment

off and on, the user is encouraged to try to

correct the interference by one or more of

the following measures:

—Reorient or relocate the receiving

antenna.

—Increase the separation between the

equipment and receiver.

—Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

—Consult the dealer or an experienced

radio/ TV technician for help.

—This device complies with Industry

Canada licence-exempt RSS stan-

dard(s). Operation is subject to the fol-

lowing two conditions: (1) this device

may not cause interference, and (2) this

device must accept any interference,

including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux

CNR d’Industrie Canada applicables

aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux

conditions suivantes : (1) l’appareil ne

doit pas produire de brouillage, et (2)

l’utilisateur de l’appareil doit accepter

tout brouillage radioélectrique subi,

même si le brouillage est susceptible

d’en compromettre le fonctionnement.

c) The device must be kept more than 20 cm from all

persons.

FCC INFORMATION

(For US and Canada Customers

Additional Safety Information specific to this product may be

contained in the Owner’s Manual supplied with this product

Outdoor Antenna Grounding

If an outside antenna or cable system is connected

to the product, be sure the antenna or cable system

is grounded so as to provide some protection against

voltage surges and built-up static charge. Article 810 of

the National Electrical Code, ANSI/NFPA 70, provides

information with reguards to proper grounding of the

mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, and size of ground

conductors, location of antenna-discharge unit, con-

nection to ground electrodes and requirements for the

grounding electrode.

Example of antenna grounding as

per National Electrical Code,

ANSI/NFPA 70

2